Motor Grease Pumps,Model:AGP-07/15.AGP-50

Untek Automatic Single Line Grease Pump consists of Reciprocating Motor Driven Plunger Pump with in built Gear Box.
The Pump incorporate a large grease reservoir with a follower plate & tell tale rod.
Limit Switch is provided on the top of the reservoir to indicate full and empty level of grease.
The pump outlet is connected to Pressure Relief Valve.Bleed Valve is provided on the pump body to bleed air entrapped in the system. Before operating the pump, Bleed Valve is kept open till the continue flow of grease starts from it.
The whole system is controlled with Electric Control Panel.

 

SPECIFICATIONS	AGP - 07/15	AGP - 50
Reservoir Capacity	7 & 15 kg	50 kg
Discharge per minute	35 gm	125 gm
Working Pressure	100 kg/sqcm	200 kg/sq.cm
Maximum Pressure	150 kg/sqcm.	300 kg/sq.cm
Electric Motor 3 Phase, 1500 rpm	0.5 HP	1.5 HP
Pressure Relief Valve (in bar)	175 kg/sqcm.	315 kg/sqcm.
Pressure Gauges (in bar)	0 to 210 kg/sqcm.	0 to 210 kg/sqcm.

Recommended Grease - NLGI 1 or 2
DIMENSIONS IN MM	A	B	C	D	E	F	G	H(MAX)
AGP - 07/15	500	75	220	400	100	500	795	1295
AGP - 50	700	75	345	550	100	500	1070	1570