Multi Line Mechanical lubricators
Multiline mechanical lubricators are used for automatic cenralised lubrication system for industrial, Marine and similar applications where lubrication to be used is oil over a vide range for viscosity from SAE 20 to SAE 250.
Driven by plant it serves or using its own electric motor with reduction Gear Untek Multiline Mechanical Lubricators provide precise and continuous lubrication from a central location. The special feature of this (Brentford type) system is its unit construction which by allowing various combination of the components, ensures a lubrication system matched to any particular requirement.
Genral Discription
The basic unit comprises a reservoir of appropriate capacity and the required number of pump units with rotatable Banjo outlets. Each pump unit fitted with a check valve. Lubricators up to 10 pumping units can be supplied with 750ml and 1.5 ltrs. reservoirs and 8 to 20 pump units with 4 ltrs reservoirs. Reservoirs capacity is nominal and total capacity includes the pump assembly casting.
Oil livel is indicated through a sight glass on all the model
Pump Operation
The pump drive shaft is provided with cams, one for each pair of pump units. These operate rocker arm which move pairea pistons alternately up and down in their respective cylinders. Each pump unit serve one lubrication line. The drive shaft can be rotated in either direction. The amount of lubrication delivered is adjusted by the knurled knobs on top of pump body. The knobs are provided with check nuts to prevent accidental movement.
Flow Indicator Assembly
An assembly comprises the appropriate number of flow indicators mounted on a suitable frame. These flow indicators indicate the regularity of delivery and flow in each oil line. Flow indicator are designed to operate oils of viscosity 41 to 173 centistokes at 40°C. Heavier oil must not be used.
| SPECIFICATION | ||||
|
| SALIENT FEATURES | ||||
|
